Santa Sacks

I realize it's probably too late to make these for this Christmas (although I just made mine yesterday), but after Christmas, pick yourself up some cheaper Christmas fabric and make them for next year...


You will need -

• Polypop fabric to suit your desired size of sack (I made mine 80cm x 110cm so I bought 1.6m per sack)
• paper templates of the letters of the name for the sack (mine were 15cm x 10cm, I could fit 5 letters across an 80cm sack, cut them to a smaller size for longer names)
  
• 0.2m Christmas fabric (you'll get 8 letters of 10cm x 15cm from that amount, buy more if necessary)
• 0.2m double sided fusible webbing
  
• 1m double sided satin ribbon
• glitter fabric paint/glue
• matching thread

To make up -

1. Iron rough side of webbing to wrong side of Christmas fabric.
2. Place and pin letter templates, then cut out.
3. Sew cut edges of polypop together and finish seam.
4. Fold so seam is at centre back and sew bottom edge of sack, finish seam.
   
5. Sew a 10cm hem at top of the sack.
   
6. Attach centre of ribbon to the back seam 20cm from the top of the sack.
7. Pull paper backing off the cut out letters.
8. Place them and iron them onto sack one at a time.
9. Trace around the edges with the glitter paint/glue.
10. Fill with pressies and goodies, tie it up and place it at the end of your child's/children's bed/s.

Wish I had one!  Merry Christmas!!

 

Beaded snowflakes

 I absolutely love these!!

What you need -

beading wire

round nose pliers

thin ribbon

2mm bicone crystals (or small bead)

4mm bicone crystals

6mm bicone crystals

head pins

eye pins

What to do -

1. On 6 eye pins feed 2 4mm bicones, 2 6mm bicones & 4 4mm bicones.  Allow 1cm to curl end with round nose pliers.
2. Cut 20cm of beading wire and secure around one of the beaded eye pins at the end of the wire.  Then secure remaining 5 pins one at a time with the beading wire while fanning each arm to form the snowflake shape.
3. Once you have secured the last arm, feed onto the remaining wire a 4mm, 6mm and 4mm bicone to form a centre piece and to cover the wiring securing the arms.  Secure the wire by winding and twisting the remainder.
4. To make the arm dangles, feed a 2mm then a 6mm bicone on 5 head pins.  Cut excess and curl to make a loop while attaching one to each end of each arm.
5. For the last arm, feed a 2mm then a 6mm bicone on one eye pin, curl and make a loop while attaching.  On the other loop of the eye pin, feed and tie a ribbon to hang snowflake.

These are so pretty I leave one hanging on my daughter's wall all year round.

Fabric Covered Christmas Decorations

These are really pretty, and they have a vintage feel to them.  I made them 20 years ago...time to make some more I think!

What you need -

foam balls
Christmas fabrics
butter knife
fine cord
sequins
pins

What to do -

• Indent 2 lines all the way around each ball to make quarters with the blunt knife.

• Cut fabric in this shape just big enough to cover each quarter of the ball.
• With the edge of the knife, push the fabric into the indentations you made until the edges disappear (cut away any excess).
• Do this for each quarter using a combination of fabrics.
• Wrap the cord around the ball (as you would around a present, twisting at the bottom).
• Secure the bottom twisted cord with a pin through a sequin.
• Make a loop at the top and cut the ends, use another sequin and pin to secure them at the top.
• Make heaps and hang them everywhere!
  

Felt Photo Christmas Decorations

What you need -

felt squares
paper templates
craft glue
scissors
knitting cotton or fine metallic cord
large eye needle
photos

What to do -

Pin paper template shapes (I used hearts, stars, bells and balls) to 2 layers of felt.
Cut out pairs of shapes.
Find something round to trace around (a large glue stick is a good size) on one of the shapes of each pair.
Carefully cut the circle out.
Cut the photos to slightly larger than the holes.
Glue behind so the felt shape becomes the frame.
Place the pair back together and using the cotton or thread, running stitch around the edges leaving enough length to tie ends together.
Hang on Christmas tree, on door knobs, anywhere...

Painted Christmas Tree Balls

What you need -

Foam balls

Metallic paint

Glitter paint

Ribbon of your choice

Star sequins

Pins

What to do -

1. Paint foam balls on one side, allow to dry.  Paint the other side.
2. Paint in the same way with glitter paint.
3. When the balls are completely dry, wrap the ribbon around the ball, twist like you're wrapping a present and bring ribbon up to the top, make a loop and secure with a pin through a star sequin.  Also secure the twisted ribbon at the bottom with a pin through a star sequin.
4. Randomly place a few more stars with pins on the ball and one in the middle of each ribbon section.
5. And, you're done!
6. Hang on the Christmas tree, or anywhere that takes your fancy.

Baby Mobile

I made this for my baby girl's room just after she was born.

It's easy and looks so gorgeous in her room.

To make it you will need -

1 wooden circle frame

1 small ring (plastic or metal)

3m cord

4 felt squares of different colours

shape patterns 5-6cms (I used stars, hearts & flowers)

craft paint

craft glue

wadding

knitting cotton

string

large eye needle

(I found all of these things at Spotlight)

• Paint the wooden frame with a couple of coats of craft paint.
• Cut the cord into 3 x 1m lengths (use sticky tape to stop ends fraying).
  
• Cut 2 of each shape from each felt colour.
• Glue the dot shapes to the centre of both sides for the flower shapes.
  
• Chose the six shapes you wish to use as the bottom level.
• Using the knitting cotton and needle, sew close to the edges using running stitch.  When a small opening remains fill with a little wadding, put the end of the cord inside the shape, then stitch the gap making sure you catch the cord with one of the stitches.  End off with a knot on the inside.  Repeat five times for the bottom level shapes.
• Sew the remaining 6 shapes in the same way on into the cord with a 10 - 15cm space from shape on the end making sure to stitch top and bottom to the cord.  Slightly different space lengths give it a more random look.
• Attach the 3 cords to the ring by folding them in half, placing the loop through the ring and pulling both ends through.
• Once the paint is completely dry on the frame, wind each cord length around the frame twice, leaving about 15 - 20cm from the ring to the frame.
• Attach a length of string to the ring so it can hang from the ceiling.

This is fun to make for your own baby.  Or make it as a gift for a baby shower or newborn.  There's something extra special about handmade gifts!

Sleeping Bags/Sleeping Sacks/Snuggle Sacks/Snuggies

When my boy was too big for the sleeping bags with sleeves (which I LOVE) yet still too little to pull up his blankets when he woke up cold, I decided to make him a sleeping bag.  Little did I know it would become one of his favourite things. He is almost five and practically lives in it (day & night) in the cooler months.

Today I made one for his little sister who is almost two and I thought I would share the idea because it is so quick and easy and cosy and comfy and practical...perfect!

Start with a polar fleece blanket, single bed size.
Bring the short sides together and sew in the longest zip you can find leaving a small opening at the top.  Sew a seam the rest of the way down to the bottom.
Sew across the bottom and the top, leaving a hole with plenty of head room.
I cut armholes and blanket stitched the edges for my boy's so he could sleep in it at night and put his arms out to undo the zip in the morning.  But he never uses the armholes, he puts his arms out from the top, so I didn't bother putting holes in my little girl's.  I still may at a later date if she needs or wants them.
I finished them off with iron-on motifs.

After all the rough play my boy gave his sleeping bag, when it started coming apart at the top and bottom I used crochet cotton to blanket stitch over the machine stitching.  Now it should last awhile longer, until he grows out of it at least.  Then I'm thinking I may open the bottom and sew some extra length in a contrasting colour, if he can't bear to part with it!

PS And here's another I made for my niece's birthday present.  As she will be 8 I sewed the long ends together and inserted a zip to give extra length.  It's a little narrower but it is still snug and cosy!!  I want to make one for myself now!

PPS And another one for another niece.  This one is all hand sewn.